Audiolab 8000X7 Multi channel Amplifier

R9,000.00

Review

 

The Audiolab 8000X7 is a genuine one-box, seven channel power amplifier, capable of handling even difficult loudspeaker loads

The Audiolab 8000X7 home theatre power amplifier delivers 7 x 100Wrms power. However, you can also run it in five or six channel mode too. By bridging two channels it is possible to create a more powerful single channel – especially useful if your front left and front right speakers are more performance critical than the other speakers in your 5.1 system. This can be achieved simply by changing switch settings on the rear of the unit.

The Audiolab 8000X7 is gain matched with the other 8000 series power amplifiers, and indeed the Power section of the 8000S integrated amplifier. It will work happily in combination with any of these should the demands of your system change in time.

Unobtrusive, with an elegant simplicity, the Audiolab 8000X7 is a compact yet powerful performer.

Category:

Description

Specifications

Power output

7 x 100W into rated load impedance (8 Ohm)
5 x 100W and 1 x 150W (8 Ohm)
3 x 100W and 2 x 150W (8 Ohm
IHF toneburst power  1.05 Vrms
Input impedance   47 kOhm
Gain          +29 dB at 1 kHz
Signal to noise   better than 90 dB (relative to 0 dBW) unweighted
Frequency Response   1.5 Hz – 150 kHz (-3 dB)
Input connector   RCA